{"id":166,"date":"2026-09-30T05:03:24","date_gmt":"2026-09-30T05:03:24","guid":{"rendered":"https:\/\/brine-injector-machine.com\/product\/aluminum-wire-double-clipping-machine-jlsk-series\/"},"modified":"2026-10-08T05:46:00","modified_gmt":"2026-10-08T05:46:00","slug":"aluminum-wire-double-clipping-machine","status":"publish","type":"product","link":"https:\/\/brine-injector-machine.com\/no\/produkt\/aluminum-wire-double-clipping-machine\/","title":{"rendered":"Aluminum Wire Double Clipping Machine \u2014 JLSK Series"},"content":{"rendered":"\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Tekniske spesifikasjoner<\/th>\n<\/tr>\n<\/thead>\n
Model<\/td>\nJLSK-II<\/td>\n<\/tr>\n
Type<\/td>\nServo-driven aluminum wire double clipping machine<\/td>\n<\/tr>\n
Clipping Speed<\/td>\n80 times\/min<\/td>\n<\/tr>\n
Total effekt<\/td>\n3 kW<\/td>\n<\/tr>\n
Spenning<\/td>\n380V \/ 50Hz \/ 3-phase<\/td>\n<\/tr>\n
Compatible Casing (flat diameter)<\/td>\n28–85 mm<\/td>\n<\/tr>\n
Clipping Head Centre Height<\/td>\n920–1000 mm (adjustable)<\/td>\n<\/tr>\n
Compatible Aluminum Wire<\/td>\n2.1 \/ 2.45 \/ 2.7 \/ 2.9 mm<\/td>\n<\/tr>\n
Compatible Molds<\/td>\nS1, S2 — quick changeover, no tool required<\/td>\n<\/tr>\n
Maskinm\u00e5l (L\u00d7B\u00d7H)<\/td>\n1160 × 1470 × 1400 mm<\/td>\n<\/tr>\n
Maskinvekt<\/td>\n600 kg<\/td>\n<\/tr>\n
Drive System<\/td>\nServo motor + single-speed mechanical transmission<\/td>\n<\/tr>\n
Kontroll<\/td>\nTouchscreen HMI, integrated counting and cutting<\/td>\n<\/tr>\n
Lubrication<\/td>\nAutomatic lubrication system (built-in)<\/td>\n<\/tr>\n
Production Line<\/td>\nCompatible with all major filling machines for full automation<\/td>\n<\/tr>\n
Konstruksjon<\/td>\nSUS304 stainless steel, aluminum alloy frame<\/td>\n<\/tr>\n
Sertifisering<\/td>\nCE-samsvarende<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\"Aluminum<\/p>\n

Aluminum Wire Double Clipping Machine<\/h2>\n

The JLSK-II Aluminum Wire Double Clipping Machine is a servo-driven, electrically operated casing sealing machine purpose-built for high-speed sausage and cooked meat production lines. Unlike traditional pneumatic clippers that depend on compressed air quality and pressure stability, the JLSK-II uses a dedicated single-speed mechanical transmission driven by a servo motor, delivering consistent 80 clips per minute output regardless of facility air supply conditions.<\/p>\n

The machine uses aluminum wire rather than pre-formed clips, offering a significant cost advantage over cartridge-clip systems on high-volume lines: aluminum wire coils in 2.1, 2.45, 2.7, and 2.9 mm diameters feed continuously without reloading interruptions, and changing wire diameter does not require changing the mold — only the wire coil. For lines running multiple casing calibres, this translates to faster changeover and lower consumable inventory requirements.<\/p>\n

Servo Drive and Mechanical Reliability<\/h2>\n

The servo motor drive eliminates the compressed air consumption and air system dependency that make traditional pneumatic clippers sensitive to facility infrastructure. Compared with pneumatic clipping machines at equivalent production speeds, the JLSK-II requires no compressor capacity allocation, produces less operating noise, and has fewer wear points in the drive train. The single-speed mechanical transmission is inherently simpler than variable-frequency drives and maintains consistent clip force throughout the operating shift without hydraulic or pneumatic pressure variation.<\/p>\n

\"JLSK-II\"Aluminum<\/div>\n

The touchscreen HMI provides an operator-friendly interface for production parameter setting, batch counting, and diagnostic display. The integrated automatic counting and cutting system tracks clips applied per batch and triggers the wire cutter automatically at preset counts, eliminating manual intervention between batches. This automation is particularly valuable in lines where the clipping machine is the throughput bottleneck — removing manual cutting steps can recover several minutes per production batch.<\/p>\n

Quick Changeover and Mold Flexibility<\/h2>\n

The JLSK-II ships with S1 and S2 molds as standard, covering the full compatible casing flat diameter range of 28 to 85 mm. Mold changeover does not require tools and takes under two minutes, making it practical to switch between different casing calibres within a single shift. The wire coil changeover — switching between 2.1, 2.45, 2.7, and 2.9 mm wire diameters for different casing wall thickness requirements — is equally fast and requires no mold change.<\/p>\n

\n

No-mold changeover for wire diameter:<\/strong> Different aluminum wire diameters can be loaded without changing the mold set, supporting fast product transitions.<\/p>\n

Optional dual filling tubes:<\/strong> Dual-tube configuration significantly increases throughput on high-volume lines — specify at the time of enquiry.<\/p>\n<\/div>\n

Automatic Lubrication and Long Service Life<\/h2>\n

The built-in automatic lubrication system continuously feeds lubricant to key mechanical components, maintaining the clipping head, cam follower, and transmission parts in correct operating condition without operator intervention between maintenance intervals. This prolongs the service life of the clipping head and reduces the frequency of mechanical wear-related downtime compared with manually lubricated clippers.<\/p>\n

\"JLSK-II<\/p>\n

The machine body is constructed from high-quality aluminum alloy and stainless steel. Core transmission components are precision-machined from high-strength steel for corrosion resistance and dimensional stability in food-processing environments where daily washdown cleaning is standard. The compact footprint (1160 × 1470 mm base) fits standard sausage production line layouts without requiring special floor modifications.<\/p>\n

Production Line Integration<\/h2>\n

The JLSK-II connects directly to all major vacuum filling machines and gravity\/piston filling systems via a standard downstream interface, enabling fully automatic filling-and-clipping line operation. When paired with the ZKG-6500 vacuum sausage filler upstream, the combined line produces filled and double-clipped sausage links at continuous flow rates with minimal operator intervention. The machine can also be used standalone with manual casing placement for smaller facilities.<\/p>\n

\"JLSK-II<\/p>\n

Suitable products:<\/strong> Fresh pork sausages in natural casing, cooked sausages and frankfurters in collagen casing, smoked sausages in protein casing, cocktail sausages and chipolatas, and any standard sausage product in casings with flat diameter 28–85 mm.<\/p>\n

Om produsenten<\/h2>\n

Shijiazhuang Sunshine Machinery Co., Ltd. was founded in 1999 and specialises in the design, manufacture, and export of commercial meat processing equipment. Our production facility in Shijiazhuang, Hebei Province operates CNC machining centres and dedicated quality-control processes. Key components are sourced from internationally recognised suppliers including Siemens servo systems and PLC, SKF bearings (Sweden), and Eaton switches (USA). We serve meat processing facilities across South America, Southeast Asia, Eastern Europe, and the Middle East. Our authorised marketing entity — Brazil Brine Injector Machine Co., Ltd — operates from Limeira, São Paulo, Brasil.<\/p>\n

Before crating, every unit runs at full rated capacity for eight continuous hours. This factory load test verifies the clipping mechanism, drive system, electronic controls, and all moving parts under actual operating conditions. Test records and video documentation are available on request.<\/p>\n

Every machine shipped from our factory is covered by a one-year whole-machine warranty from the date of arrival at your facility. The warranty covers all mechanical assemblies, drive components, electronic controls, and structural parts. A quick-wear spare parts kit specific to this model is packed with every shipment at no additional charge.<\/p>\n

Ofte stilte sp\u00f8rsm\u00e5l<\/h2>\n

What is the difference between aluminum wire clipping and pre-formed clip clipping?<\/strong><\/p>\n

Aluminum wire clippers feed wire from a coil and form the clip in-machine during the capping operation. Pre-formed clip machines (such as the CSK double clipper) use pre-stamped aluminium clips loaded in cartridges. Wire-feed systems have a significantly lower consumable cost per clip at high volumes and eliminate the need to stock multiple clip cartridge sizes. Pre-formed clip machines offer more consistent clip geometry for certain casing types and are the preferred choice for very thin or delicate natural casings.<\/p>\n

Can I switch between different aluminum wire diameters without changing the mold?<\/strong><\/p>\n

Yes. The JLSK-II supports 2.1, 2.45, 2.7, and 2.9 mm wire diameters without a mold change. Only the wire coil needs to be replaced. Mold changes (between S1 and S2) are required when switching between casing calibre ranges, not when changing wire diameter.<\/p>\n

What is the maximum production speed?<\/strong><\/p>\n

The JLSK-II clips at 80 times per minute at rated speed. This is the mechanical limit of the single-speed transmission. For higher throughput requirements, the optional dual filling tube configuration effectively doubles product output per clip cycle.<\/p>\n

Does this machine require compressed air?<\/strong><\/p>\n

No. The JLSK-II is fully electrically driven by a servo motor. No compressed air connection is required for the clipping mechanism. The only utility requirement is a 380V \/ 50Hz \/ 3-phase electrical supply.<\/p>\n

What maintenance does the clipping head require?<\/strong><\/p>\n

The automatic lubrication system handles routine maintenance of the clipping head and cam mechanism between scheduled service intervals. Manual inspection of clip quality and wire feed path is recommended daily. Full maintenance schedule and service intervals are detailed in the English-language operation manual supplied with every machine.<\/p>\n

\n

Ordre og logistikk<\/p>\n

Klar til \u00e5 bestille?<\/p>\n

\n
\n
30\u201345<\/div>\n
Arbeidsdager<\/div>\n<\/div>\n
\n
FOB<\/div>\n
Tianjin<\/div>\n<\/div>\n
\n
1 \u00e5r<\/div>\n
Garanti<\/div>\n<\/div>\n
\n
8 timer<\/div>\n
Test f\u00f8r forsendelse<\/div>\n<\/div>\n
\n
T\/T<\/div>\n
30% \/ 70%<\/div>\n<\/div>\n
\n
CE<\/div>\n
Sertifisert<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Standard lead time from order confirmation is 30–45 working days, including the 8-hour pre-shipment test and export crating. Default trade term is FOB Tianjin. CIF to major destination ports and EXW ex-factory are both available. Payment: T\/T 30% deposit, 70% before shipment.<\/p>\n

\n

MOQ:<\/strong> Complete equipment is quoted on a project basis — no fixed piece-count MOQ. New customers may request 1–5 unit samples at sample price for evaluation before a full order. Mixed-model orders combining multiple machine types are welcomed to meet minimum order value thresholds.<\/p>\n<\/div>\n

\n

Be om et tilbud<\/p>\n

Our team responds within 1 business day. Please include your target casing type and diameter, production volume, destination port, and any line integration requirements.<\/p>\n

Be om et tilbud \u2192<\/a>Send oss \u200b\u200ben e-post<\/a><\/div>\n

\n

Relaterte produkter og sider<\/p>\n

CSK Double Clipping Machine<\/a>ZKG-6500 Vakuump\u00f8lsefyller<\/a>P\u00f8lsefyllingsmaskiner<\/a>R\u00f8ykehusutstyr<\/a>Be om et tilbud<\/a><\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

The JLSK-II Aluminum Wire Double Clipping Machine is a servo-driven casing sealing unit operating at 80 clips per minute with no compressed air requirement at the clipping mechanism. Power: 3 kW, 380V \/ 50Hz \/ 3-phase. Compatible casing flat diameter: 28–85 mm. Supports aluminum wire diameters 2.1, 2.45, 2.7, and 2.9 mm — switchable without changing the mold. Ships with S1 and S2 molds for fast changeover between casing calibres. Built-in automatic lubrication system extends clipping head service life and reduces maintenance downtime. Integrated touchscreen HMI and automatic counting-and-cutting system eliminate manual batch-cutting steps. Machine dimensions 1160 × 1470 × 1400 mm; weight 600 kg. Compatible with all major vacuum filling and piston filling machines for fully automated line operation. SUS304 stainless steel and aluminium alloy construction. CE compliant. FOB Tianjin, 30–45 working day lead time, 1-year whole-machine warranty with quick-wear spare parts kit included.<\/p>","protected":false},"featured_media":156,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[25],"product_tag":[],"class_list":["post-166","product","type-product","status-publish","has-post-thumbnail","product_cat-clipping-sealing-machines","first","instock","product-type-simple"],"_links":{"self":[{"href":"https:\/\/brine-injector-machine.com\/no\/wp-json\/wp\/v2\/product\/166","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/brine-injector-machine.com\/no\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/brine-injector-machine.com\/no\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/brine-injector-machine.com\/no\/wp-json\/wp\/v2\/media\/156"}],"wp:attachment":[{"href":"https:\/\/brine-injector-machine.com\/no\/wp-json\/wp\/v2\/media?parent=166"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/brine-injector-machine.com\/no\/wp-json\/wp\/v2\/product_brand?post=166"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/brine-injector-machine.com\/no\/wp-json\/wp\/v2\/product_cat?post=166"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/brine-injector-machine.com\/no\/wp-json\/wp\/v2\/product_tag?post=166"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}