설명
| 기술 사양 | |
|---|---|
| 모델 | CSK-15/18 |
| 유형 | Servo-driven double clipping machine with Changcheng clip |
| Clipping Speed | 0–120 times/min (adjustable) |
| 총 전력 | 3.5kW |
| 전압 | 220V ±10% (single phase, PLC controlled) |
| Air Pressure (cutter only) | 0.5–0.6 MPa |
| Air Consumption | 0.0064 m³ (cutter only) |
| Compatible Casing (flat diameter) | 30–120 mm |
| Compatible Clip | Changcheng (long-city) aluminum clip |
| Cutting Cycles | 0–9 times (pneumatic cutter, adjustable) |
| 기계 크기 (길이×너비×높이) | 760 × 750 × 770 mm |
| 기계 무게 | 760 kg |
| Drive System | Servo motor + HMI touchscreen + PLC controller |
| Lubrication | Automatic lubrication system (built-in) |
| Production Line | Compatible with vacuum fillers and filling lines for full automation |
| 건설 | Aluminum alloy + SUS304 stainless steel |
| 인증 | CE 규격 준수 |
Automatic Double Clipping Machine for Sausage and Ham Casing
The CSK-15/18 Automatic Double Clipping Machine is a servo-driven casing sealing unit using Changcheng (long-city) aluminium clips for double-end closure of sausage, ham, and cooked meat products in casings from 30 to 120 mm flat diameter. With an adjustable clipping speed range of 0 to 120 times per minute and a compact 760 × 750 mm footprint, the CSK-15/18 fits directly into existing sausage production lines and connects to upstream vacuum filling or piston filling machines for fully automated operation.
The machine is servo-powered with Siemens-compatible HMI touchscreen and PLC controller, enabling precise, repeatable clip placement and real-time production monitoring. The pneumatic cutting system is used only for the wire cutter function and requires minimal air supply (0.5–0.6 MPa at the cutter only), making it suitable for facilities with limited compressor capacity that cannot support fully pneumatic clippers.
Changcheng Clip System and Sealing Quality
The CSK-15/18 uses the Changcheng (long-city) aluminium clip format, which produces a clean, uniform, and visually attractive seal that meets retail and export market presentation standards. The Changcheng clip design applies consistent sealing force across the clip body, reducing the risk of seal failure from clip deformation during high-speed production runs.
The built-in automatic counting and pneumatic cutting system handles wire cutting at programmable intervals (0 to 9 cutting cycles), eliminating the operator task of manually cutting between product segments. This automation reduces labour requirements at the clipping station and maintains consistent product spacing on the output without timing-dependent operator skill.
Intelligent Control System
The servo drive system, HMI touchscreen display, and PLC controller form an integrated intelligent control platform. The operator sets clipping speed, product length, cutting interval, and batch count through the touchscreen interface. The PLC maintains these parameters across the production run and monitors for abnormal conditions in the clipping mechanism.
PLC + HMI control: Servo drive system with programmable touchscreen interface for speed, cutting interval, and batch count.
Automatic lubrication: Built-in system continuously lubricates key components, reducing wear and extending service life.
Compatible Casing Range and Product Applications
The CSK-15/18 covers a wider casing range than most comparable machines in its class, supporting flat diameters from 30 to 120 mm. This range encompasses virtually all commercial sausage, frankfurter, cooked ham, and smoked meat casing sizes from the thinnest cocktail sausage collagen casings to large-diameter protein and fibrous casings used for ham loaves and large cooked products.
- Fresh pork sausages and frankfurters in natural and collagen casing (30–60 mm flat diameter)
- Cooked and smoked sausages in protein and collagen casing (up to 80 mm flat diameter)
- Ham and processed meat products in large-diameter protein or fibrous casing (80–120 mm)
- Blood pudding and liver sausage in natural large casing
- Salami and dry-cured products in collagen and fibrous casing
- Export-format cooked meat products requiring uniform, presentation-quality clip seals
제조업체 소개
1999년에 설립된 저희 회사는 중국 허베이성 스자좡에 위치한 산업용 육류 가공 기계의 공장 직영 제조업체입니다. 진공 충전, 염지액 주입, 절단 및 밀봉, 볼 커팅, 훈제 및 보조 장비를 포함한 소시지 생산의 전 과정을 아우르는 제품군을 제공합니다. 모든 기계는 CE 인증을 획득한 식품 등급 스테인리스강 SUS304 규격으로 제작됩니다. 브라질에 있는 해외 지사를 통해 남미 지역 유통을 담당하고 있으며, 유통 마진을 추가하지 않고 모든 주문을 공장에서 직접 처리합니다.
Each machine completes an eight-hour full-load pre-shipment test at rated speed before leaving the factory. The test confirms mechanical stability, clipping consistency, and control system performance. Documentation is provided to customers on request.
A 12-month factory warranty covers the complete machine from the arrival date, including servo drive, PLC electronics, clipping mechanism, and all transmission components. Quick-wear consumables are included as standard so your production line continues operating from day one.
자주 묻는 질문
How does the CSK-15/18 differ from the JLSK aluminum wire double clipper?
The CSK-15/18 uses pre-formed Changcheng aluminium clips loaded in a magazine, while the JLSK-II forms clips from an aluminum wire coil. The CSK’s pre-formed clip produces a more consistent clip geometry for a wider range of casing types, particularly thin collagen and natural casings. The JLSK wire-feed system has a lower consumable cost per clip at very high volumes. Both machines support fully automated line integration.
What voltage does this machine require?
The CSK-15/18 operates on 220V ±10% single-phase for the main servo and control circuits. The pneumatic cutter function requires 0.5–0.6 MPa compressed air. This makes it compatible with single-phase power supplies at the clipping station without requiring a three-phase distribution board at that position.
Can the clipping speed be adjusted during production?
Yes. The clipping speed is continuously adjustable from 0 to 120 times per minute via the HMI touchscreen. Operators can modify speed during a production run to match the filling machine’s output rate or to accommodate product changes requiring different casing tension.
What does the adjustable cutting cycle (0–9) mean?
The pneumatic cutter can be programmed to activate every 1 to 9 clips, allowing operators to set the segment length — the number of linked sausages between cuts. Setting 0 disables automatic cutting. This is controlled via the PLC and can be adjusted per product type without stopping production.
How is this machine positioned relative to an imported clipper?
The CSK-15/18 uses the same fundamental clip-sealing mechanism as high-end imported clipping machines and is engineered to replace imported units in most sausage line applications. The servo drive, PLC control system, and automatic lubrication are equivalent in function to those found in higher-cost imported equipment, with factory-direct pricing and a shorter lead time.
주문 및 물류
주문할 준비 되셨나요?
주문 확정부터 FOB 톈진 출고 준비까지 30~45영업일 소요되며, 생산, 검사, 부하 시험 및 수출 포장이 포함됩니다. 지원되는 인코텀즈: FOB 톈진(기본값), CIF, EXW, DAP는 요청 시 제공 가능합니다. 표준 결제 방식은 T/T 30/70입니다.
최소 주문 수량: 완제품 산업용 기계의 경우, 수량보다는 주문 금액을 기준으로 평가됩니다. 처음 구매하시는 분들은 단품 또는 소량 샘플 주문에 대해 문의하실 수 있습니다. 최소 주문 금액을 충족하기 위해 당사 제품군의 여러 모델이나 제품 카테고리를 조합하여 주문하시는 것을 권장합니다.
견적 요청
Our team responds within 1 business day. Please include your target casing type and diameter, production volume, destination port, and any line integration requirements.
Replacing Imported Clipping Equipment: A Direct Comparison
The CSK-15/18 is designed to be a direct functional replacement for imported high-speed double clipping machines in commercial sausage and cooked meat lines. The servo drive system, PLC controller, HMI touchscreen, and automatic lubrication match the key technical features that make imported equipment the previous benchmark for food processing line reliability. The CSK-15/18 delivers these features at factory-direct pricing from the same manufacturing facility that produces the ZKG-6500 vacuum filling machine — a significant cost reduction for processing facilities upgrading from manual or pneumatic clipping stations, or replacing aged imported equipment.
A side-by-side comparison of technical parameters shows that the CSK-15/18 matches or exceeds imported equipment on clip speed (0–120 times per minute versus the 60–100 range of most comparable imported clippers), casing diameter range (30–120 mm flat diameter covers the full commercial sausage and ham range), and cycle automation (PLC-controlled counting and pneumatic cutting at 0–9 programmable intervals).
주문 방법 및 지정 사항
When requesting a quotation for the CSK-15/18, please include: your primary casing type and flat diameter range; target clip speed per minute; whether downstream automation integration is required; your facility power supply (voltage and phase); and destination port. Email 저희 영업팀에 문의하세요. 또는 방문하세요 문의하기. We respond within 1 business day with pricing, specifications, and lead time confirmation.
